African Fine Art

Printing For Profit in Platinum From Digital Negatives – The Concise Guide – Part 4/7

Part 4/7 – Darkroom techniques.

COATING. Start mixing the solution in a short glass. For an 8×10″ print I use 15 drops of ferric oxalate, 15 of palladium/platinum, and 1 drop of Na2 at 2.5%. Many books recommend more. I do not think it is necessary, for 30 drops of solution will cover an 8×10″ print very well even with a brush.

Note: At this point you may think that the percentage of Na2 should vary depending on the print and one can not just say “one drop of Na2 at 2.5%”. This is indeed not true, for you already have the correct contrast sorted in the negative, hence ALL you digital images will print well with just ONE drop of 2.5% Na2 contrast agent. Also, ALL your prints (on the same paper) will print with the same exposure, in my case this is ~4 minutes but this time of course depends on the UV unit and you will find your own time.

With digital negatives, the printing process itself is almost routine and can not go wrong, because the negative is, in fact, spot on and perfect. Of course, getting this ‘perfection’ in the negative may take some time and tweaking.

Some may think that just one drop of 2.5% Na2 may be too little and the prints will show some fogging. I have never experienced this probably because of the small quantity of oxalic acid added to the ferric oxalate solution. Keep in mind that Na2 is a very powerful contrast agent. If you want, you can use one drop at 5%, this will also leave some room should your print show too much contrast. If you decide to do so, of course, you will have to modify slightly your Photoshop curve, as described in Part 5. Personally, I have always been using one drop at 2.5%.

Once you have the solution ready, fill/empty the syringe in the glass 3 or 4 times to mix the solution thoroughly. Get the brush and pour some little water on it, then dry it with a tissue but be sure to leave it a bit moist. Take the sheet of paper and the negative that you are going to print. Lay the negative on the paper and look at it for 5 seconds to make a visual image of where to coat (this is sufficient you do not need to draw amateurish pencil lines or make templates to limit the coating area). Remove the negative (put it back in its envelope and do not leave it exposed near the coating area or small drops of solution will inevitably land on it when coating) and get the brush, with the same hand also get the syringe. I am right handed so I quickly squirt the solution in a line from left to right along the long side of the paper. You want to form a nice long bead in the center of the paper, this does not work well if you pour the solution from a glass, hence the syringe (without needle of course!). Immediately pass the empty syringe to the other hand (which you will use to hold the paper down too) and start coating in large vertical stripes first, then horizontal and repeat until the entire area (of which you still have a visual image in your mind) is perfectly covered. No need to push hard on the brush, its own weight will be plenty. Be accurate and swift in this for the goal is coating well the paper with less solution as possible of course. If you end up with huge black borders it obviously means that you are over coating, if the negative can not fit the coated area it means, of course, that you are under coating. Some experts recommend a chemical called Tween20 to facilitate coating, to me this product has always proved to be useless. You can get yourself started practicing with something not expensive such as coffee and photocopy paper. Soon you will be able to cover the entire area leaving a nice and thin black border all around the print all by eye.

After this is done, leave the freshly coated paper to dry (I cover it temporarily with a cardboard lid for protection from light, bugs, dust etc). After about two minutes (just to allow the solution to penetrate the paper) put the sheet under the drier for another two or three minutes. Do not leave the paper to air dry too long or the solution will ‘go through’ the paper and the image will look weak. On the other hand you must allow some time before hot drying to allow the metals to penetrate and give the print the famous ‘platinum presence’. You will have to experiment a bit with these times, also depending on your climate and time of the year, humidity etc., not that it makes such a huge difference anyway. Just, as said throughout these articles, be consistent and always follow the same procedures and timing.

While the paper is drying, you can wash glass, brush and syringe, ready for your next print. What if you break a rule and do not wash them: in this case, your next print will require (considerable) less solution, like 11 drops instead of 15, a great way to save money. This is possible because, as said, all our prints use the same mix (contrast agent etc). Or, you can group the prints with the same contrast/mix before starting your printing session. However, even though it does work, I do not do this, because when I started there were no digital negatives and each negative would of course require its own (different) contrast mix, and I am used to that procedure. Also, it makes me uncomfortable (sort of cheating?). Consider this not a recommendation but a possible working trick to save some money especially when making additional prints from the same negative. Be careful: whatever your procedure, if the print has not received adequate coating, it will look quite anemic and weak. You can experiment making a test print (maybe along with a step wedge) with more or less solution and see if there is any difference.

Once the paper is dry, briefly inspect it, it should exhibit a nice and uniform orange coating. If there are flaws, like maybe small dots, you will take care of these when spotting. In fact, whatever you see on the coated paper now there is little you can do. If you see a bristle from the brush, you can try to lift it off with a scalpel. I have never experienced this with my Grumbacher though. With Cranes, depending on the batch, sometimes some small areas look lighter when seen through the light. These spots will disappear once the print is made and dry so do not worry. If there are major flaws, like thin uncoated areas, it might be a good chance to experiment with double coating, for example.

Now place the paper on the contact printing frame, then the negative and the glass and put them inside the UV unit for the required exposure. During this time you can coat another sheet for your next print or, if you are not so busy, just relax.

DEVELOPING. Now it is the moment for some magic. Just take the exposed sheet of paper and slide it swiftly in the developer tray from one side, you want it to “cut” through the surface of the solution. Some people keep the solution in a jug and splash it over the print but I do not agree with this technique. Others tilt the tray to leave a dry area at the bottom where they lay the paper and then allow the solution to cover the paper, I would not do this either. From now on, please keep in mind that we are working with water color paper that is not supposed to stay almost one hour in chemicals and running water, hence it will become very fragile, so take extreme care when handling. The image will develop immediately. It is generally recommended to let the print in the developer for one to two minutes, I have found that one minute is sufficient and there is no change in the image keeping the print longer than that (this is not silver printing). I have, however, standardized my procedure to 1,5 minutes. The temperature of the developer will have some effect on the final color (higher temperature = warmer color). I have a sort of big dish warmer under the tray even though I seldom use it, because I like the color I get at room temperature with the added benefit that of course the developer will last longer.

After developing the print, lift it and drain very well and take it to the washing tray for a quick wash, this will make the clearing solution last longer. Then you just start the clearing process passing the print from the first to the third tray (4/5 minutes each, rocking them gently every now and then, especially in the first tray) and finally in the washer for no more than 30 minutes. After washing, drain well, then get two sheets of blotting paper and gently and carefully absorb all the water from the print. If you press too much the blotting paper will leave marks in the print. At this point the print is ready for air drying on a mesh (face up, another difference from silver printing). You can inspect it but keep in mind that once dry it will be considerable darker, especially the highlights. If the print looks OK wet you can be sure that it will look too dark once dry. If you see any flaw in the print (black spots, dust, hair or whatever) do not even try to touch its surface with your finger because it will leave a mark on it. Put the blotting paper sheets to dry too, do not use them again with your next print. By the way, do not buy those blotting paper books, they tend to develop mold and will become all warped. Buy loose sheets and take care of them, or replace often. After this, you will be ready to make another print, or if you are done, just put the developer back in its bottle and wash the trays. Every printing session, I also clean the glass of the contact printing frame.

I usually leave my prints to dry overnight. If you are in a hurry, you can dry a print in the same hot air drying unit used with coated sheets, but it will not dry very flat and also you do not want to stress the paper fibers. I hot dry sometimes to quickly evaluate some prints. After the print is dry, you can assess it. The first print from a new negative, of course, needs a full evaluation, additional prints from the same negative, if you are consistent in the darkroom, will only need a quick check. I mask the black borders with a bevel window cut sheet of my usual mounting board, to avoid ruining the shadows in the print. I generally check the print in average light conditions, certainly not under a strong fluorescent light of course and not in the darkroom. If I am happy with the print I proceed with spotting (once flat), if I am not, it means that there is something wrong with the negative so back to Photoshop to make another one. Keep in mind that we are striving to get a good, easy to print negative, and Pictorico film is not terribly expensive, so, at least in my case, I find more convenient to make another negative.

Of course, you still have some control in the darkroom. If the print is flat you can use more contrast agent, if it is too dark or too light you can change exposure time a little. If the print is too punchy and contrasty the only solution is to make another negative. If there are areas in need of burning or dodging, which is an annoying procedure when contact printing under UV, it is better to do the corrections in Photoshop and make another negative.

Sometimes you will find that technically the print is OK yet it does not work, which means that you must develop an aesthetic correlation between what you see on the screen and what the finished print will look. In some way, what Ansel Adams called “pre-visualization”. In his method, pre-visualizing the actual print when looking at the camera’s ground glass, in our case, it is something similar but we are looking at a computer screen. A last thought on assessing platinum and especially palladium prints: the print should be beautiful and with good “presence”. The shadows should be thick and juicy, and the highlights should almost glow, i.e. be “light”. If this is not the case, often the problem is that you are printing too dark. Often people, coming from other printing processes, especially silver, follow the same visual accomplishments they were used to, with harsh contrast and deep shadows, which in my opinion is wrong in pt-pd (although there are many different schools on this). Often the mid tones are printed too dark, which is an easy fix with Photoshop. Especially with portraiture and landscapes try to stay less contrasty than you think, more “delicate”.
Further details on this in Part 5, making the digital negative.

About the Author

Luca Paradisi has been an internationally collected artist and fine art printmaker for many years. For more fine art photography inspiration you can visit his web site at artblackandwhite.com where he shows his work which includes landscapes, still life, abstracts, and architectural.

Newman Roller Frame’s NEW FlashPanels Screen Printing Mesh

Kate Aspen Two Peas in A Pod – Ceramic Salt and Pepper Shakers in Ivy Print Gift Box $2.10 Kate Aspen – Two Peas in a Pod – Ceramic Salt & Pepper Shakers in Ivy Print Gift Box…

Set of 4 Absorbent Coasters – Jungle Tropics – Bronze $19.99 Thirstystone Ambiance coaster line features a wide selection of stylish, trend-right designs….

Patricia Sanders Creations – Black Frame Leopard Print Animal Prints – Coasters Black Frame Leopard Print Animal Prints Coaster is new commercial quality product that will complement your home decor. Available in 3.5″ x 3.5″ soft rubber-backed polyester and 4.25 x 4.25 ceramic high gloss finish tiles with rubber backing. Colors will not run….

Canciones De Amor $4.60 Take a step back in time with an old view of Wheatland T14N-R7W from Mecosta County 1996 in Michigan. This map was originally published by Rockford Map Publishers, Inc. in 1996 and will be carefully reproduced on state of the art giclee printers. Sourced from item number US444670 in the Historic Map Works online collection, this print will make the ideal gift for any historian or map buff. Many of…

12 Pack Kids Party Favor Super Songs CD (Packaged in carrying case with Stickers, Crayons and Coloring Book) $41.28 This 12 Pack Kids Party Favor Super Songs CD will be a big hit at your next birthday party. This party favor set includes 12 individual activity kits. Each kit has: 1 CD with 50 Super Songs for kids (see track listing for entire list of songs), Stickers, Crayons and a Coloring Book all packaged in a convenient carrying case. This product is a perfect party favor to hand out at your next kid s birt…

Bear Welcome Bear Welcome Our Bear Welcome vintage lodge sign is given real rustic treatment with the plain barnwood frame with raised border. A terrific addition to porch, entryway or rec room, this print measures 20×10 with an overall dimension of 24×14. Includes barn wood frame, glass and hanging hardware. Made in the USA. Product Specifications: Fits 20×10 print – finished size: 24×14 Plain barnwood frame …

Hogan’s Heroes: The Komplete Series, Kommandant’s Kollection $64.98 HOGAN’S HEROES:KOMPLETE SERIES KOMMAN – DVD Movie…

Home Improvement: 20th Anniversary Complete Collection $129.99 Studio: Buena Vista Home Video Release Date: 05/10/2011 Run time: 4700 minutes…

Gone with the Wind (70th Anniversary Ultimate Collector’s Edition) $25.18 David O. Selznick wanted Gone with the Wind to be somehow more than a movie, a film that would broaden the very idea of what a film could be and do and look like. In many respects he got what he worked so hard to achieve in this 1939 epic (and all-time box-office champ in terms of tickets sold), and in some respects he fell far short of the goal. While the first half of this Civil War drama is tau…

Animal Print Sunglasses Assortment (1 dz) $6.00 5″ long sunglasses in zebra, leopard and tiger prints. 12 assorted glasses per pack….

‘Come to Bed’ Framed Art Print $71.99 Title: Come to BedProduct type: Framed gel coated, hand-applied texture finish Image dimensions: 36 inches high x 24 inches wide

David Lorenz Winston ‘Solitude’ Framed Art Print $99.99 Artist: David Lorenz Winston Title: SolitudeProduct Type: Framed print

Sean Jacobs ‘Garden Party’ 2-piece Framed Art Print Set $238.99 Artist: Sean JacobsTitle: Garden PartyStyle: Contemporary

Gustav Klimt ‘The Tree of Life, 1905-1911′ Framed Art Print $79.99 Artist: Gustav KlimtTitle: The Tree of Life, 1905-1911Product type: Framed gel coated, hand-applied texture finish

Ansel Adams ‘Birds on a Beach, Evening, 1966′ Framed Art Print $101.99 Artist: Ansel AdamsTitle: Birds on a Beach, Evening, 1966Product type: framed print

Journee Collection Women’s Mixed Animal Print Frame Clutch Wallet $18.49 A fashionable mixed animal print adds style to this clutch wallet by Journee Collection. This metal frame wallet is completed with multiple pockets and sleeves to organize your basic essentials.

Brent Nelson ‘Aquamarine I’ Framed Art Print $73.99 Artist: Brent NelsonTitle: Aquamarine IProduct type: Framed print

Ansel Adams ‘Fiat Lux: Trilogy’ Framed Art Print $96.99 Artist: Ansel AdamsTitle: Fiat Lux: TrilogyProduct type: framed print

Laurie Maitland ‘Symphony in Red and Khaki II’ Framed Art Print $66.99 Artist: Laurie MaitlandTitle: Symphony in Red and Khaki IIProduct type: framed print

Klimt ‘Three Ages of Woman (Detail IV), 1905′ Framed Art Print $71.99 Artist: Gustav Klimt Title: Three Ages of Woman – Mother and Child (Detail IV), 1905Product type: Framed print

Gustav Klimt ‘The Kiss, 1907′ Framed Art Print $68.99 Artist: Gustav Klimt Title: The Kiss (Le Baiser / Il Baccio), 1907 Product Type: Framed Print

Laurie Maitland ‘Symphony in Red and Khaki I’ Framed Art Print $69.99 Artist: Laurie MaitlandTitle: Symphony in Red and Khaki IProduct type: framed print

Georgia O’Keeffe ‘Petunias, 1925′ Framed Art Print $54.99 Artist: Georgia O’KeeffeTitle: Petunias, 1925 Product type: Framed print

Jon Bertelli ‘Curiosity’ Framed Art Print $82.49 Artist: Jon Bertelli Title: Curiosity Product Type: Framed Print

Katsushika Hokusai ‘The Great Wave off the Coast of Kanagawa’ Framed Art Print $82.99 Artist: Katsushika HokusaiTitle: The Great Wave off the Coast of KanagawaProduct type: Framed art print

‘The Last Dance’ Framed Art Print $42.99 Title: The Last DanceProduct Type: Framed printOutside frame dimensions: 9.5 inches wide x 11.5 inches high

Jack Vettriano ‘The Singing Butler’ Framed Art Print $85.99 Artist: Jack VettrianoTitle: The Singing ButlerProduct type: Framed print

Pablo Picasso ‘La Muse’ Hand-painted Framed Art Print $169.99 Artist: Pablo Picasso Title: La Muse Product type: Framed art

Diane Romanello ‘Paradiso’ Framed Art Print $74.99 Artist: Diane RomanelloTitle: ParadisoProduct Type: Framed print

‘Paradise Found’ Framed Art Print $68.99 Title: Paradise FoundProduct type: Framed gel coated, hand-applied texture finish Image dimensions: 24 inches high x 36 inches wide

Frank Ritter ‘Elegance’ Framed Art Print $90.99 Artist: Frank Ritter Title: EleganceProduct Type: Framed Print

Steven N. Meyers ‘Four Callas #3′ Framed Art Print $63.99 Artist: Steven N. Meyers Title: Four Callas #3Product type: Framed print

Walter Paulson ‘Botanica’ Framed Art Print Set $205.99 Artist: Walter Paulson Title: BotanicaProduct Type: Limited edition framed print set

Vintage Repro ‘Keep Calm (Red)’ Framed Art Print $70.99 Artist: Vintage ReproTitle: Keep Calm (Red)Product type: Framed gel coated, hand-applied texture finish

Ansel Adams ‘Redwoods, Founders Grove, 1966′ Framed Art Print $53.99 Artist: Ansel Adams Title: Redwoods, Founders Grove, 1966 Product Type: Framed Print

Gustav Klimt ‘The Kiss’ (Le Baiser / Il Baccio) Framed Art Print $62.99 Artist: Gustav KlimtTitle: The Kiss (Le Baiser / Il Baccio)Product Type: Framed Print

Ansel Adams ‘Mount McKinley Range, 1948′ Framed Art Print $175.99 Artist: Ansel AdamsTitle: Mount McKinley Range, Clouds, Denali National Park, Alaska, 1948Product Type: Framed Art Print

Angeli ‘Late Summer’s Expectation I’ Framed Art Print $125.99 Artist: Sylvia AngeliTitle: ‘Late Summer’s Expectation I’ Product Type: Framed printLimited edition

Gall ‘The Eiffel Tower from The Trocadero, 1925′ Framed Art Print $60.99 Artist: Gall Title: The Eiffel Tower from The Trocadero, 1925 Product Type: Framed Print

Pablo Picasso ‘Le Chien (The Dog)’ Framed Art Print $71.99 Artist: Pablo PicassoTitle: Le Chien (The Dog)Product Type: Framed print

‘Teamwork: Sunset Climbers’ Framed Art Print $67.99 Title: Teamwork: Sunset ClimbersOutside Frame Dimensions: 23 inches wide x 29 inches highProduct Type: Framed Print

Ansel Adams ‘Moon Over Half Dome’ Framed Art Print $149.99 Artist: Ansel AdamsTitle: Moon Over Half DomeProduct type: framed print

Steven N. Meyers ‘Eucalyptus I’ Framed Art Print $60.99 Artist: Steven N. MeyersTitle: Eucalyptus I Framed Art PrintProduct Type: Framed Print

Mel Allen ‘Ullswater, Glenridding, Cumbria’ Framed Art Print $138.99 Artist: Mel AllenTitle: Ullswater, Glenridding, Cumbria Framed Art PrintProduct Type: Framed Print

Journee Collection Women’s Animal Print Flower Frame Clutch Wallet $18.49 A fashionable leopard print floral accent adds style to the front of this clutch wallet by Journee Collection. This metal frame wallet is completed with multiple pockets and sleeves to organize your basic essentials.

Claude Monet ‘Fishermans Cottage’ Framed Art Print $67.99 Artist: Claude Monet Title: Fishermans Cottage on the Cliffs at VarengevilleProduct Type: Framed art print

Maeve Harris ‘Garden’ 2-piece Framed Art Print Set $203.99 Artist: Maeve HarrisTitle: GardenStyle: Contemporary

Steven N. Meyers ‘Triumph Tulip’ Framed Art Print $40.49 Artist: Steven N. Meyers Title: Triumph TulipProduct Type: Framed print

Sylvia Angeli ‘Mountain High I-IV’ Giclee Framed Prints (Set of 4) $168.99 Artist: Sylvia AngeliTitle: Mountain High I-IVProduct Type: Framed art set of four pieces

Diane Romanello ‘Paradise Sunset’ Framed Art Print $77.99 Artist: Diane RomanelloTitle: Paradise SunsetProduct Type: Framed Art Print